Reproduction grey slate made from precast concrete add charm and character to any development from new build to listed buildings or proporties in conservation areas.With a rustic texture and individual colouring that can be seen on natural stone slate roofs every reproduction slate is unique.
Every slate is coloured using the highest quality metal oxide pigments and set in moulds taken from casts of natural stone grey slate,to give that really authentic appearance that is colour fast and will weather naturally.
With the benefits of modern day manufacturing techniques and the traditional beauty of stone and at a fraction of the cost
Image:
This picture shows Reproduction Slate laid on a new development.This colour was used to give the impression of old slate laid with the underside showing.
This is often done using old stone slate to extend its life.
As you can see from the instalation they can be laid in diminishing coarses.
Approximately 7.5 slates per 1M2 as laid
Reproduction grey slates have an average weight of 110 Kg/M sq when fixed with the standard 100mm head lap
20 Kg per metre run
Average of approximately 35 KN
Recommeded minimum roof pitch is 22.5%
The slates are easily cut using a stone cutting disc
Minimum 50mm x 25mm to BS 4471:1987 in not less than 1200mm lengths
Image:
This close up shows the detail on each slate.They are cast with the same sedimentary layers, that can be seen on natural stone slate.
Image:
Uniform in thickness, and available in many sizes and colours, that are ultra violet, safe and colour fast.
Image:
Natural stone slate is also available and sold by weight.
Image:
Web graphics designed by:
"The Photo Car Show Team"
You can visit The Photo Car Show Team by:Clicking Here
Other pages:
This is the text-only version of this page. Click here to see this page with graphics.
Edit this page |
Manage website
Make Your Own Website: 2-Minute-Website.com